When you want the best in Fiberglass Bodywork...
You want Armour Bodies!
Kawasaki Ninja 300 13-17
Free Shipping Australia & New Zealand!
At Motospares / Roost Industries we are the official Australia supplier of Armour Bodies Fairing Kits. We have an exclusive contract with Armour Bodies that helps us supply you with lower cost fairing kits, without the hassle of importing them yourself. We believe these kits to be the best race fairing kits in the industry. If you are looking for the ultimate in high end fiberglass race fairings, look no further!
In Roadracing World's magazine test that featured the top 9 brands of fiberglass fairing kits, Armour Bodies at the front of every major category! With exceptional fit, finish and offering "zero damage when flexed" you can see why Armour Bodies is a real "showstopper".Click here to download the article.
Each Armour Bodies fairing kit comes with:
- All panels required for the bike such as upper, lower, front guard and tail. Please note: only Honda CBR600RR & 1000RR kits come with a tank cover
- Windscreen - all Armour Bodies upper fairings are the same as the standard screen shape, so you can use you own screen if you wish.
- Dzus fastener kit
You will need:
- Well nuts from original windscreen
- Factory bolts for fitting to frame
- Seat foam (ifRace Seat Tailordered and you did not order a seat foam with it)
- A good set of tools
- A free afternoon and a couple of beers
Individual Panels
Front Guard - $169.95
Upper Fairing - $489.95
Lower Fairing - $420.95
Tail (race seat) - not available
Tail (standard Seat) - $379.95
Windscreen - $109.95
Fastener set - $29.95
Please note:Whilst complete fairing kits are Free Shipping to Australia and New Zealand. Individual panels listed above are subject to shipping costs if ordered as not part of a complete kit. Pleasecontact us with your addressfor shipping rates on individual panel orders.
Please note: If you order a kit with a Race Seat Tail, you will require a Seat Foam. We have our own brand of Dr Glass Seat Foams - click here to view
Or you can order this kit with an Armour Bodies custom fit Seat Foam, designed to fit exactly to this model Race Tail.
Options for ordering seat foams can be found to the right of the pics above.
Please note:Armour Bodies fairings are NOT pre-drilled. To avoid poorly fitted fairings, it is much better to drill the fairings when they are sitting on the bike and correctly aligned with the mounting points. This is why they are not pre-drilled.
ARMOUR BODIES PRO-SERIES
Pro Series fit, finish, flexibility and crash worthiness has made it an industry leader.This is anything but just another bodywork set. The quality is apparent as soon as youpull it out of the box.
FULL SHEET FIBERGLASS
Each kit is assembled from a full sheet of fiberglass allowing for the strongest,lightest bodywork possible. Other manufacturers save money using scraps of fiberglass in their kits, making them heavier and brittle. Pro Series bodywork will often survive a crash that would leave some other bodywork in pieces.
SPECIAL RESIN
Armour Bodies uses a special resin derived from the kayak industry. Originallycreated to withstand rocky impacts, our specially formulated resin provides superiorflexibility and weight savings. This resin also has a very low shrinkage ratio, ensuring a perfect fit.
FINISH
We spend more time finishing our bodywork than any other manufacturer in theindustry. Every kit is meticulously finished, filling holes and sanding edges toinsure a perfect surface on every kit, as well as a coat of Matte Black paint on the inside of all panels. The bodywork is finished on the outside with a Hydroxy Acrylic (2 pack) primer, ready to paint with just a light scuff, saving you time and money in the booth.
CARBON/KEVLARREINFORCEMENT
Armour Bodies has raised the bar onceagain by adding Carbon/Kevlar reinforcement to all the mounting areas at noextra cost. These reinforcements helpprevent cracking at the mount pointsduring a crash, keeping your bodyworkintact and on the bike where it belongs. Our flexibility, finish, fit and price set usapart from all others.
Armour Bodies fairing kits are used by riders such as
- Eugene Laverty - Team Parkalgar Honda - UK World Supersport
- Ben Bostrom & Roger Lee Hayden - Team Michael Jordan Motorsparts - Superbike AMA
- California Superbike School - Worldwide
What is the difference between Race Seat Tail and Standard Seat tail?
A Standard Seat Tail uses the OEM or stock seat. This makes it softer and more comfortable.
A Race Seat Tail takes out the OEM seat and it is replaced by a seat support, seat pan, and an adhesive seat foam. This is slightly stiffer, allowing for more feedback from the bike.
How do I mount my kit?
Here is a set of general instructions on mounting our bodywork.
Click here to download a PDF file.
What are Armour Bodies kits made out of?
Industry leading fiberglass/kevlar and special resin. Originally created to withstand rocky impacts on lightweight racing kayaks, our specially formulated resin provides superior flexibility and weight savings. This resin also forms the best available bond with common fiberglass repair kits, giving you the most durable repairs possible should you ever need to fix your bodywork.
Can I purchase Armour Bodies kits painted?
Simply put, no. However Armour Bodies comes with an industry leading urethane primer that needs only a light scuff and is ready for paint. This not only leads to a beautiful finish but also saves in preparation time so your painter will love you for it.
What if my bike is not listed on your website?
Assuming your bike is currently being used in racing, we are most likely working on it. Shoot us an email to be sure though.
Armour Bodies Vids
